Chapter 1: Introduction to Basic Tools and Hardware
Lesson 2: Types of Nuts and Their Uses
Learning Objectives
Learning Objectives Section
- Identify the four different types of nuts used in the V5 system: Low profile Nut, Keps Nut, Hex Nut, and Nylock Nut.
- Identify that the Low profile Nut is a small, non locking nut great for prototyping, that can fit inside C Channels.
- Identify that the Keps Nut is a locking nut with an external tooth lock washer, and can be hand-tightened and still give a strong hold.
- Identify that the Hex Nut is a larger, non locking nut, that only fits into Hex Nut Retainers, and must go on the outside of a C Channel.
- Identify that the Nylock Nut is a locking nut with a nylon insert, useful for more permanent connections, that must be tightened with a tool.
Summary
Summary Section
In this Lesson, you will learn about the four types of nuts used in V5. You will see the features and functions of each type of nut, and learn about what screws and tools are used with the nuts while building.
Ready to move to the next video? Watch Lesson 3: How to Choose the Best Screw Length.
View the following resources related to the concepts covered in the video as you continue your learning.
Post questions and join discussions in the V5 category of the PD+ Community for collective learning and exploration related to the course. View this article to learn more about viewing and creating posts in the PD+ Community.